60A 4in1 8-bit ESC

A 60 A 4-in-1 ESC with an 8-bit high-speed MCU — fast response and efficient drive with hardware synchronous rectification and stall protection, for FPV and UAV builds.

• 60 A × 4 continuous, 80 A × 4 burst (30 s)
• 2S–6S Li-ion / LiPo, 6–28 V input
• PWM / DShot / OneShot motor protocols
• Hardware synchronous rectification, stall protection
• Pre-installed heatsink
• 30.5 × 30.5 mm M4 mounting, SH1.0-8P signal connector

Key specs: MCU: 8-bit high-speed Continuous current: 60 A × 4 · Burst: 80 A × 4 (30 s) Input: 2S–6S · 6–28 V Protocols: PWM / DShot / OneShot Size & weight: 43.5 × 44 × 8.5 mm · 30.5 × 30.5 mm M4 mounting · ≈20 g (with heatsink) Connector: SH1.0-8P Operating: −10°C to +55°C · 10–95% RH

In the box: 1× 60A 4-in-1 ESC (8-bit) 1× SH1.0-8P cable (48 mm) 1× XT60 pigtail (12 AWG, 155 mm) 1× 35 V 1000 µF solid capacitor 5× M3 hex socket screw 5× M3 hex nut 5× M3 rubber standoff (blue)

Full pinout, wiring, and electrical data: see the spec sheet on this page.