H743v1 Flight Controller

The CORVON H743v1 is a proven 30×30 flight controller — STM32H743 at 480 MHz with dual IMUs, a workhorse for FPV builds and UAV platforms on any of the four major firmware stacks.

• Dual IMUs: Bosch BMI088 + BMI270
• DPS310 barometer + IST8310 compass
• 7 UART ports, 10 PWM outputs (DShot capable)
• On-board BEC rails: 5V 3A + 9.5V 3A
• USB-C, blackbox logging

Key specs: MCU: STM32H743VIT6, Cortex-M7 @ 480 MHz (2 MB flash / 1 MB RAM) IMU: BMI088 + BMI270 (dual) Barometer: DPS310 · Compass: IST8310 UART: 7 · PWM: 10 (DShot) BEC: 5V 3A · 9.5V 3A Power: 2S–6S LiPo Size & weight: 36 × 36 × 8 mm · 30.5 × 30.5 mm mounting · 9 g Firmware: PX4 · ArduPilot · INAV · Betaflight

In the box: 1× H743v1 flight controller 2× SH1.0-8P cable (48 mm) 1× SH1.0-6P cable (160 mm) 4× SH1.0-4P cable (155 mm) 1× SH1.0-3P cable (85 mm) 1× SH1.0-3P cable (105 mm) 5× M3 hex socket screw 5× M3 hex nut 5× M3 rubber standoff (blue) 5× rubber O-ring pad (black)

Full pinout, wiring, and electrical data: see the spec sheet on this page.