H743v2 Flight Controller
SKU · FC-H743-V2
$59.99 USD
Shipping and delivery terms: Shipping policy
Works with
ArduPilot · PX4 · INAV · Betaflight
Documentation
Spec sheet →User guide
Open guide →The Bluetooth tuning guide covers wireless tuning of the 743v2 only. It does not replace the spec sheets or each firmware’s own setup documentation.
The CORVON 743v2 is our flagship 30×30 flight controller — STM32H743 at 480 MHz with dual IMUs, built for FPV pilots and UAV integrators who need clean sensor data and headroom for autonomy work.
- Dual IMUs: TDK ICM-42688-P + Bosch BMI088
- High-precision Bosch BMP581 barometer + IST8310 compass
- 8 UART ports, including dedicated DJI O4 and Bluetooth ports
- 12 PWM outputs: M1–M10 DShot + M11/M12 servo
- Dual analog battery monitoring (BAT1 + BAT2), 2S–10S LiPo
- USB-C, on-board BEC outputs
Key specs: MCU: STM32H743VIH6, Cortex-M7 @ 480 MHz (2 MB flash / 1 MB RAM) IMU: ICM-42688-P (primary) + BMI088 (secondary) Barometer: Bosch BMP581 · Compass: IST8310 UART: 8 — incl. DJI O4 + Bluetooth; UART8 pre-bound MAVLink @ 115200 PWM: 12 — M1–M10 DShot, M11/M12 servo RC input: SBUS / CRSF / ELRS / FPort / DSM / SUMD Power: 2S–10S LiPo, dual battery monitoring Size & weight: 36 × 36 × 8 mm · 30.5 × 30.5 mm M4 mounting · 9.1 g Firmware: PX4 · ArduPilot · INAV · Betaflight
In the box: 1× 743v2 flight controller 1× SH1.0-8P cable (48 mm) 1× SH1.0-6P cable (160 mm) 6× SH1.0-4P cable (155 mm) 5× M3 hex socket screw 5× M3 hex nut 5× M3 rubber standoff (blue) 5× rubber O-ring pad (black)
Full pinout, wiring, and electrical data: see the spec sheet on this page.