H743v2 Flight Controller with 50A 8 bit Stack

A pre-matched stack: the CORVON 743v2 flight controller paired with a 50A 8-bit 4-in-1 ESC — wired, mounted, and verified together for FPV pilots, aerial mapping, and DIY builds.

FC: STM32H743VIH6 Cortex-M7 @ 480 MHz, dual IMUs (ICM-42688P + BMI088), BMP581 barometer + IST8310 magnetometer 8 UART ports, 12 PWM outputs ESC: 50A × 4 continuous, 60A burst (MAX 30 s), 8-bit MCU PWM / DSHOT / ONESHOT motor protocols 2S–10S LiPo for FC / 2S–6S Li-ion battery (6V - 28V) for ESC Key specs:

FC MCU: STM32H743VIH6 Cortex-M7 @ 480 MHz (2 MB Flash / 1 MB RAM) Sensors: dual IMUs (ICM-42688P + BMI088) · BMP581 · IST8310 UART: 8 · PWM: 12 ESC: 50A × 4 continuous · 60A burst (30 s) · 8-bit Protocols: PWM / DSHOT / ONESHOT Power: 2S–10S LiPo for FC / 2S-6S Li-ion for ESC · 30.5 × 30.5 mm mounting (FC) / spacing 30 × 30 mm (ESC) Firmware: PX4 · ArduPilot · INAV · Betaflight In the box:

1× CORVON 743v2 flight controller 1× 4IN1-ESC-YT0 50A ESC (8-bit) 1× XT60 pigtail (12 AWG, 155 mm) 1× 35 V 1000 µF solid capacitor 2× SH1.0-8P cable (48 mm) 1× SH1.0-6P cable (160 mm) 4× SH1.0-4P cable (155 mm) 1× SH1.0-3P cable (85 mm) 1× SH1.0-3P cable (105 mm) 5× M3 hex socket screw 5× M3 hex nut 10× M3 rubber standoff (blue) 5× rubber O-ring pad (black) Full pinout, wiring, and electrical data: see the flight-controller and ESC spec sheets in our Docs.