H743v2 Flight Controller with 60A 32 bit Stack

A pre-matched 30×30 stack: the CORVON 743v2 flight controller paired with a 60A 32-bit 4-in-1 ESC — wired, mounted, and verified together for FPV pilots, aerial mapping, and DIY builds.

• FC: STM32H743 @ 480 MHz, dual IMUs (ICM-42688-P + BMI088), BMP581 barometer + IST8310 compass
• 8 UART ports (incl. DJI O4 + Bluetooth), 12 PWM outputs
• ESC: 60 A × 4 continuous, 80 A × 4 burst (30 s), 32-bit MCU
• PWM / DShot / OneShot motor protocols
• 2S–6S LiPo for the stack (the FC alone takes 2S–10S)

Key specs: FC MCU: STM32H743VIH6, Cortex-M7 @ 480 MHz (2 MB flash / 1 MB RAM) Sensors: ICM-42688-P + BMI088 · BMP581 · IST8310 UART: 8 · PWM: 12 (M1–M10 DShot, M11/M12 servo) BEC: 5V 3A · 9V 2A ESC: 60 A × 4 continuous · 80 A × 4 burst (30 s) · 32-bit Protocols: PWM / DShot / OneShot Power: 2S–6S LiPo (ESC 6–28 V) · 30.5 × 30.5 mm M4 mounting Firmware: PX4 · ArduPilot · INAV · Betaflight

In the box: 1× 743v2 flight controller 1× 60A 4-in-1 ESC (32-bit) 1× XT60 pigtail (12 AWG, 155 mm) 1× 35 V 1000 µF solid capacitor 2× SH1.0-8P cable (48 mm) 1× SH1.0-6P cable (160 mm) 4× SH1.0-4P cable (155 mm) 1× SH1.0-3P cable (85 mm) 1× SH1.0-3P cable (105 mm) 5× M3 hex socket screw 5× M3 hex nut 10× M3 rubber standoff (blue) 5× rubber O-ring pad (black)

Full pinout, wiring, and electrical data: see the flight-controller and ESC spec sheets in our Docs.